Natural Convection Exercise 3—Preparing the Mesh
A mesh is a computational grid inside, outside, or both inside and outside any closed geometry defined by a CAD surface.
Generating the Mesh
1. In the Flow Analysis Tree, select Domains.
2. In the Properties panel, Model tab, for Mesh Generation, type the following values:
◦ Maximum Cell Size — 0.005
◦ Minimum Cell Size — 0.0005
◦ Cell Size on Surfaces — 0.005
3. Click 
Generate Mesh to create the mesh for the fluid domain. If the Info dialog box opens, click Yes to convert all the units.
Generate Mesh to create the mesh for the fluid domain. If the Info dialog box opens, click Yes to convert all the units.Viewing the Mesh
1. Click 
in the Graphics toolbar to display the style elements. Select 
No Hidden, 
Hidden Line, or 
Wireframe to display the mesh.
in the Graphics toolbar to display the style elements. Select No Hidden, Hidden Line, or Wireframe to display the mesh.2. Clear 
CAD Bodies and 
Flow Analysis Bodies.
CAD Bodies and Flow Analysis Bodies.3. Under Domains, select CONCENTRIC_ANNULUS.
4. In the Properties panel, View tab, set Keep drawing, Grid, and Outline to Yes. The mesh for the boundary CONCENTRIC_ANNULUS appears in the graphics window.