Multicomponent Mixing using a Nozzle: Exercise 5—Creating Monitoring Points
1. Create two monitoring points.
2. In Results, under Monitoring Points right-click Point 01.
3. Select Rename and in the New Name box type Throat_center_Point.
4. In the Properties panel, Model tab, set Position to 0.055500, 0.055000, -0.230000.
5. In Results, under Monitoring Points right-click Point 02.
6. Select Rename and in the New Name box type Throat_edge_Point.
7. In the Properties panel, Model tab, set Position to 0.055500, 0.062500, -0.230000.
8. In the Functions panel click 
Turn on/off view properties and select 
Hidden Line from the list. The monitoring point appears as shown in the image.
Turn on/off view properties and select Hidden Line from the list. The monitoring point appears as shown in the image.