Simulation > Creo Simulate > Creo Simulate Results Window > Results for Native Mode > Viewing Results > Capping and Cutting Surfaces > To Modify a Capping Surface
To Modify a Capping Surface
Use this procedure to modify a solid cut through your model.
1. Click View > Edit. The Results Surface Definition dialog box opens.
2. To redefine the surface definition, select a method from the Define By drop-down list.
3. If you changed your surface definition method to Three Points, use the selector arrow to select three points.
4. If you changed your surface definition method to UCS, use the selector arrow to select the desired coordinate system.
5. If you want to redefine the reference plane orientation, select XY, YZ, or ZX, as appropriate.
6. If you want to redefine which side of the capping surface Creo Simulate trims, select Above or Below, as appropriate.
7. If you want to change the cutting surface depth, use one of the following methods:
◦ Manually change the depth by entering a new value in the Depth field.
◦ Dynamically change the depth by clicking Dynamic and dragging the mouse to increase or decrease the depth. Click the middle mouse button when you are finished repositioning the cutting surface.
Creo Simulate updates the Depth value on the Results Surface Definition dialog box to reflect your change.
8. Click OK to close the dialog box.
Return to To Create a Capping Surface.