Simulation > Creo Simulate > Reference Links > To Define a Shear & Moment Quantity
To Define a Shear & Moment Quantity
This procedure assumes that you have completed the appropriate preliminary steps in To Define a Result Window.
1. Select Shear & Moment from the Quantity drop-down list on the Quantity tab. Shear & Moment is only available on the Quantity drop-down list if you select Graph from the Display Type drop-down list.
2. Use the check boxes and drop-down list under Beam to select beam components.
3. Select beams or curves from the Graph Location drop-down list, then use the selector arrow to select the location from your model.