To Create a Sheet Metal Cut
1. Click > 
Extruded Cut. The Extruded Cut tab opens.
Extruded Cut. The Extruded Cut tab opens.2. Click Placement. The Placement tab opens.
◦ When a sketch exists, click Unlink to break the association with the sketch. An internal sketch is created using a copy of the sketch. Create a sketch and click 
.
.◦ When a sketch does not exist, click Define and set references. Create a sketch and click .
.3. Click Options. The Options tab opens. Select a Depth option and a value for each side, if required.
4. To create a sheet metal cut, click 
and select the type of cut to create. To create a solid cut, make sure that is not selected and choose one of the following options.
and select the type of cut to create. To create a solid cut, make sure that is not selected and choose one of the following options.◦ 
—Creates the cut by removing material normal to the driving and offset surfaces. You can create this type of cut when it is possible to unbend and bend back the model geometry on cutting areas.
—Creates the cut by removing material normal to the driving and offset surfaces. You can create this type of cut when it is possible to unbend and bend back the model geometry on cutting areas.◦ 
—Creates a cut by removing material normal to the driving surface.
—Creates a cut by removing material normal to the driving surface.◦ 
—Creates a cut by removing material normal to the offset surface.
—Creates a cut by removing material normal to the offset surface.5. To thicken the sketch, click 
and specify a value.
and specify a value.6. To flip the depth direction to the other side of the sketch plane, click 
.
.7. Click 
.
.