Sheetmetal > Sheetmetal > Designing in Sheetmetal Design > Creating and Modifying Walls > Creating Walls > Extruded Walls > About the Extrude Tool in Sheetmetal Design
About the Extrude Tool in Sheetmetal Design
In Sheetmetal Design, Creo 7.0 introduces two sheetmetal-specific tools that provide you with the same capabilities as the legacy Extrude tool. The two tools are:
• The Extrude tool. To access this tool, click Sheetmetal > Extrude.
This tool can be used to create the following features:
◦ Unattached extruded walls
• The Extruded Cut tool. To access this tool, click Sheetmetal > Extruded Cut.
This tool can be used to create the following features:
◦ Sheet metal cuts that remove solid material from the sheet metal wall, normal to the driven or to the offset surface, or normal to both surfaces
◦ Solid cuts that remove solid material from the sheet metal wall, normal to the sketch plane
About the Extrude User Interface for Sheetmetal Design
About the Extruded Cut User Interface for Sheetmetal Design
To Create an Unattached Extruded Wall