Sheetmetal > Sheetmetal > Using Sheetmetal Design > To Create a Sheet Metal Part
To Create a Sheet Metal Part
1. Click New. The New dialog box opens.
2. Under Type click Part.
3. Under Sub-type click Sheetmetal.
4. In the File Name box, type a name for your new sheet metal part.
5. If you want to use the default template, click OK.
To use a custom template, perform the following operations:
a. Clear Use default template and click OK. The New File Options dialog box opens.
b. Browse to the desired template. Click OK.
* 
If an object type is not supported by a template the Use default template option is not available. For template-supported file types, if you always want to see the New File Options dialog box, set the force_new_file_options_dialog configuration option to Yes. Remember, this configuration setting may be overridden by your system administrator in the config.sup file.