Piping > Piping > Routing > To Set a Start Point
To Set a Start Point
1. Click Route Pipe. The Rigid Pipes commands become available.
2. Click Set Start. The Define Start dialog box opens.
3. Select one of the following references:
Segment end
Free fitting port
Break point
Use the smart filters to aid selection.
4. Change the Parameters.
5. Select a Dimension or Align pipe edge option.
6. Use the drag handles or type a value to change the location or offset of the start point.
7. Click the arrow for the Offset from options. These options are available when the new pipe size and the main pipe size are different.
8. Click OK.