To Redefine Spec-Driven Fittings
1. Select the fitting in the Model Tree or graphics window, right-click and click from the shortcut menu. The Redefine Fitting dialog box opens.
2. Under Alignment, you can redefine the following parameters:
—Near point. Aligns the inlet (upstream) port of the fitting with the location point of the fitting.
—Center point. Aligns the outlet (downstream) port of the fitting with the location point.
—Far point. Places the fitting so that the alignment point is in the middle of the two ports.
—Flips the fitting.
Alignment offset—Offset the alignment.
3. Change the Rotation angle from the standard options or using the thumb wheel.
4. Click OK to complete the redefinition of the fitting on the pipeline and close the dialog box.