Piping > Piping > Setting Up Piping Library > Bend Tables > To Assign a Bend Table
To Assign a Bend Table
To Assign a Bend Table in Spec-Driven Piping Mode
* 
Spec-Driven Piping allows you to assign a bend table at any time in the design process.
1. Click Design Rules. The Define Design Rules dialog box opens.
2. Select the line stock by doing one of the following:
Under By Segment, click and select pipe segment from the graphics window.
Under By Parameters, select a line stock name from the Model Tree or Piping System Tree.
3. Click Edit. The Design Rule Parameters dialog box opens.
4. Select a bend table from the Bend Table Name box (Default value: NO_TABLE). This box lists all bend tables defined for the pipe segment or line stock.
5. Click to apply the bend table. The Design Rule Parameters dialog box closes.
6. Click to close the Define Design Rules dialog box.
To Assign a Bend Table in Non Spec-Driven Piping Mode
A Bend Table is assigned to each segment through the Line Stock.
1. Click Setup > Line Stock. The LINE STOCK menu opens.
2. Click Edit. The LINE STOCK NAMES menu opens.
3. Click a line stock name. The LineStock dialog box opens.
4. Click the DesignRule tab. The Design Rule Parameters dialog box opens.
5. Select a bend table from the Bend Table Name list. The default value is NO_TABLE. This box lists all the bend tables defined for the pipe segment or line stock.
6. Click OK to apply the bend table. The Design Rule Parameters dialog box closes.
7. Click Cancel to close the Design Rules dialog box.