To Access the Clocking Angle as General Information

1. Click

Piping Info. The Report Pipeline dialog box opens.

2. Under Info Type, click Clocking Angle and under Definition, click

and select a pipe segment in the Creo Parametric window.

3. Select a pipe segment with flexible portions.

You cannot select a pipe segment with a bend or miter cut.

4. Select or create a coordinate system at the highlighted end of the segment.

◦ The coordinate system origin must be coincident with the highlighted end of the selected pipe segment.

◦ The z-axis of the coordinate system must be aligned pointing inward along the pipe segment from that end.

◦ The coordinate system should belong to the active assembly.

5. Select the final coordinate system at the highlighted end of the selected segment, using the same constraints as before.

The system displays an INFORMATION WINDOW and writes the information to a file.