Piping > Piping > Design Rule Checking and Piping (Report) Information > Spec-Driven Pipeline Reporting > Spec-Driven Designatable Pipe Reporting > Example: Bend Location Report
Example: Bend Location Report
The pipe bend location report for the selected pipeline is stored in your working directory as a text file named bend_locs.dat in the following format:
Bend Location Information
=========================
Bend #
X
Y
Z
Bend Angle
Bend Radius
---------
----------
----------
----------
----------
-----------
1
0.00
0.00
0.00
2
0.00
0.00
1495.39
90.00
560.00
3
0.00
10100.00
1495.39
90.00
560.00
4
0.00
10100.00
3989.39
90.00
560.00
5
5718.30
10136.89
3989.39
Information about designated reports is stored in the piping assembly. You can access this information by using the report table repeat region functionality in the Drawing mode. The following table maps the entities in the report with their corresponding parameters:
Entity
Parameter
Pipe Segment
&asm.mbr.pipe.segment.name
Bend Location Csys
&asm.mbr.pipe.segment.loc_csys.name
Bend #
&asm.mbr.pipe.segment.loc_csys.bend.loc_num
X
&asm.mbr.pipe.segment.loc_csys.bend.loc_x
Y
&asm.mbr.pipe.segment.loc_csys.bend.loc_y
Z
&asm.mbr.pipe.segment.loc_csys.bend.loc_z
Bend Angle
&asm.mbr.pipe.segment.loc_csys.bend.loc_angle
Bend Radius
&asm.mbr.pipe.segment.loc_csys.bend.loc_radius