Piping > Piping > Pipeline Modification > Spec-Driven Pipeline Modification > About Pipeline Modification
About Pipeline Modification
Using the Modify Pipeline functionality, you can modify pipes in an active assembly in the following ways:
• Change the bend parameters.
• Change the corner type.
• Change the line shape of flexible pipes.
• Display the flow direction or reverse the flow direction.
• Edit the pipeline specifications and parameters.
You can also make dimensional changes to pipelines outside of the active assembly; however, changes are not observed until either the assembly in question or the top level assembly is made active and regenerated.
During the modification or automatic propagation of pipelines, Spec-Driven Piping checks for the fittings that can overlap at different locations on a pipeline. The fittings that are being overlapped are highlighted and the modification of the pipeline is terminated.
* 
Spec-Driven Piping does not check overlap for no-break fittings during various piping modeling operations.
To Edit a Pipeline
To Modify a Corner Type
To Modify Pipe Segments
To Modify the Bend Parameters
To Modify the Line Shape of a Flexible Hose
To Replace a Bend with an Elbow
To Reverse Flow Direction
To Modify Pipeline Parameters
To Modify Line Stock Parameters
Using the Modify Pipeline Dialog Box
Resolving a Failed Regeneration