Piping > Piping > Routing > Pipeline Insertion and Modification > About Inserting and Modifying a Pipeline in Another Pipeline
About Inserting and Modifying a Pipeline in Another Pipeline
Spec-Driven Piping allows you to insert a pipeline or a part of the pipeline into another pipeline. This is useful to piping designers who work in large industrial environments and frequently use certain pipeline configurations. These pipeline configurations can be inserted into other pipelines and modified according to the requirement of designers to achieve productivity gains in modeling.
The insert pipeline tab allows you to insert a selected pipeline, referred to as the From Pipeline, into the active pipeline, referred to as the To Pipeline.
Use the Pipeline Insertion function to perform the following tasks:
Copy a selected pipeline or a part of it and insert it on the To pipeline at the Set Start location.
* 
You can select a pipeline trajectory that begins or ends with a free port fitting, but when you start insertion at a free port fitting, you must choose an insertion point.
Specify the first segment of the From Pipeline that is inserted into the To Pipeline.
Specify the orientation of the first segment of the From Pipeline in the To Pipeline assembly.
Specify the rotation angle about the first segment to orient the inserted From Pipeline.
Propagate the inserted From Pipeline based on the size and the specification information defined at the Set Start location on the To Pipeline.