You cannot relocate radii that the system places at the ends of round pieces. |
• If you prefer to relocate a radius from the Sets tab, select the radius to relocate in the Radius table # column and select Reference from the Location box (located to the right under the table). After the location collector activates, select the vertex or datum point from the graphics window. You can also activate this collector using the Location Reference shortcut menu command. • To quickly identify a radius from the Sets tab, place your cursor over a radius number on the Radius table # column. The system dynamically highlights each radius, enabling you to select it. • If you want to use a datum point, but one is not present, you can create one without closing the Round tool by clicking > > and opening one of the Datum Point tools. • As you work in the graphics window, you can use Clear from the shortcut menu to clear all references from the active collector. • To remove a reference from within a collector, select the reference that you want to remove, and with your cursor still in the collector, right-click and choose Remove from the shortcut menu. |