You can select Full Round again to restore the round to its previous state. |
• If you are using a chain as a reference and you want to modify it, click Details on the Sets tab and use the Chain dialog box. • As you work in the graphics window, you can use Clear from the shortcut menu to clear all references from the active collector. • To remove a reference from within a collector, select the reference that you want to remove, and with your cursor still in the collector, right-click and choose Remove from the shortcut menu. • To easily create a round as you work in the graphics window, select edge references, right-click and choose Round Edges from the shortcut menu. The Round tool opens enabling you to continue working with the round. Note that this command is available only if you select edge references. |