Part Modeling > Part Modeling > Engineering Features > Hole > Standard Holes > Embedded Hole Files > To Embed a Hole File into a Part Model
To Embed a Hole File into a Part Model
1. Set the hole_file_resolution configuration option to use_internal.
2. Click Model > Hole. The Hole tab opens and preview geometry of the hole is displayed.
3. Select the placement reference where you want to place the hole.
4. Click Standard to create a standard hole. The standard hole options are shown.
5. Select your customized hole chart from the Thread type list.
6. Set the other parameters for the hole to appropriate values.
7. Click OK.
8. Save the part model file.