To Copy Features Using the Advanced Reference Configuration
Use this technique to copy features and replace the original references of the copied feature with new references, and to create new bodies to be used as references in the copies.
1. Select a feature to copy or move.
2. Click > 
Copy. The entire feature is copied onto the clipboard.
Copy. The entire feature is copied onto the clipboard.3. Click > 
Paste Special. The Paste Special dialog box opens.
Paste Special. The Paste Special dialog box opens.4. Select Advanced reference configuration, and click OK. The Advanced Reference Configuration dialog box opens.
The references of the original feature are listed in a table. You can now replace the original references with new ones, or keep some of the original references.
5. To replace an original feature reference with a new one:
a. Select a reference from the References of original features list.
b. Under References of pasted features, click the collector, and select a new reference.
To restore the original references, click Reset.
6. To create new bodies to be used as references in the copies, under References of original features, select the body reference, and select Create new body. Otherwise the copied geometry is created in the same body as the original geometry.
 | If you are pasting more than one feature, the second feature can use the references of the first feature. |
7. Continue to define the new references. When finished, click 
.
.