To Create Simple Conical Cosmetic Threads
1. Click > > 
Cosmetic Thread. The Thread tab opens.
Cosmetic Thread. The Thread tab opens.2. Click 
to display the simple thread options.
to display the simple thread options.3. To select a surface to thread, click the Placement tab, click the Threaded surface collector, and then select a conical surface.
4. To change the thread height (distance between the inner and outer thread surface), on the Thread tab in the box next to 
, type a value.
, type a value.5. To set the start of the thread, perform one of these actions:
◦ Click the Depth tab, click the Start thread from collector, and then select a reference (plane, surface, or quilt).
◦ Click the 
collector on the Thread tab and select a reference.
collector on the Thread tab and select a reference.An arrow appears indicating the direction of the thread creation.
6. To flip the thread to the other side of the start reference, click 
on the Thread tab.
on the Thread tab.7. To set the thread length (distance from the start reference), select a command in the Length option box on the Depth tab:
◦ 
Blind. Type a length value in the box.
Blind. Type a length value in the box.◦ 
To Selected. Select a surface, plane, curve, axis, vertex, point, or quilt at which to end the threading.
To Selected. Select a surface, plane, curve, axis, vertex, point, or quilt at which to end the threading.8. To change the pitch or threads-per-inch value, in the box next to 
, type a value.
, type a value.9. To change a parameter value, click the Properties tab, and then click a cell in the Parameters table.
10. Click 
.
.