Mold Design and Casting > Creo Mold Analysis (CMA) > PTC Creo Mold Analysis > Gate Setup > To Add a Gate Manually
To Add a Gate Manually
1. Click Gate Setup. The Gate Setup dialog box appears.
2. Click Add and click the location or a datum point on the surface of the default solid body to assign a gate location. The Gate Diameter Setting dialog box appears.
3. Enter a value for the gate diameter in the Diameter box.
4. Click OK to close the Gate Diameter Setting dialog box. The gate location displays in the Gate Setup dialog box.
5. Click OK.
About Gate Setup
To Add a Gate Automatically
To Edit or Delete a Gate