Mold Design and Casting > Mold Design and Casting > Working with Parting Surfaces > Modifying Parting Surfaces > To Draft the Geometry of a Parting Surface
To Draft the Geometry of a Parting Surface
1. In the Model Tree, click the parting surface feature and select Redefine Parting Surface from the mini toolbar. The Parting Surface tab opens.
2. Click Draft. The Draft tab opens.
3. Use the draft tool to create a draft feature for the parting surface.
To create a draft offset feature or to create an area offset feature, click Offset and use the options to create the required feature.
About Modifying Parting Surfaces
To Create a Draft Feature
About the Draft User Interface
To Create Offset Surfaces with a Draft