Mold Design and Casting > Mold Design and Casting > Using Reference Parts > Reference Part Layout > To Create a Reference Part Coordinate System on the Fly
To Create a Reference Part Coordinate System on the Fly
Use the Reference Model Orientation dialog box to create a coordinate system that defines the reference model orientation.
1. On the Mold or Cast tab, click Reference Model > Locate Reference Model. The Layout dialog box and the Open dialog box open.
2. In the Open dialog box , select a .prt file reference model and click Open. The Create Reference Model dialog box opens.
3. In the Create Reference Model dialog box, select a Reference model type and the reference part file name, and click OK.
4. In the Layout dialog box, under Ref.Model Origin and Orient, click .
5. Click GET CSYS TYPE > Dynamic. The Reference Model Orientation dialog box opens.
6. Change settings as needed and click OK.