Mold Design and Casting > Mold Design and Casting > Design Models > To Create a Mold Assembly with Multiple Design Models
To Create a Mold Assembly with Multiple Design Models
1. Create or retrieve a mold model.
2. Click Mold > Assemble Reference Model. The Open dialog box opens.
3. Select the name of the design model in the browser window.
4. Assemble the new design model by using the options on the Component Placement tab.
5. At the prompt, enter the name of the new reference model. Each additional design model creates a new reference model in the mold assembly.
6. Repeat Steps 2 through 5 to assemble additional design models, or use the Pattern command.
7. Regenerate the assembly and the workpiece to update the mold cavity.
About Design Models
Example: Design Model for Casting
To Remove a Component