To Edit the Placement of a Manikin
1. Select the manikin from the Model Tree or the graphics window to edit its placement.
2. Click > 
Edit Placement. The Place Manikin dialog box opens.
Edit Placement. The Place Manikin dialog box opens.3. Change any placement setting as needed:
a. To set the manikin’s posture, select the Standing or Sitting check box.
b. To select a surface for the manikin to stand or sit on, click the Place on collector, and select a curved or flat surface. Click 
to flip the direction 180°.
to flip the direction 180°.c. To select a direction for the manikin to face, click the Facing collector, and select a surface or datum plane. Click to flip the direction 180°.
to flip the direction 180°.4. Click OK.