To Create a Pocket Milling NC Sequence
1. Ensure that the active operation references a Mill or Mill/Turn workcell.
2. Click > > 
Pocketing.
Pocketing.3. The NC SEQUENCE menu appears with the required commands checked. The following Pocketing specific commands are available on the SEQ SETUP menu in addition to the common commands for all NC sequence types:
◦ Surfaces—Select surfaces to mill. If you are selecting quilt surfaces, specify which side of the surfaces you wish to machine.
◦ Build Cut—Access the Build Cut functionality.
The required options are checked off automatically. Select additional options, if desired, and click Done. The system will start user interface for all selected options in turn.
4. On the NC SEQUENCE menu, click Play Path to verify the tool path automatically generated by the system. If not satisfied, you can either modify the parameters, or use the Customize functionality to adjust the tool path.
5. Click Done Seq or Next Seq when satisfied.