To Display Closed Quilt Volume Interference
1. In an assembly, click Analysis > Inspect Geometry > Global Interference > Volume Interference.
In a part, click Analysis > Pairs Clarence > Volume Interference.
The Volume Interference dialog box opens. Quick is the default analysis type.
2. Click in the Quilt collector and select the required quilt.
3. Click Show All to display the result of the analysis in the Creo Parametric graphics window or click Clear to clear the collector and the result of analysis.
4. Click Preview to compute the analysis.
In an assembly, the bodies that interfere with the selected quilt, along with the parts containing them, are listed. The area of interference is highlighted in the graphics window.
In a part, the bodies that interfere with the selected quilt are listed.
5. Click to view the report of the analysis in the INFORMATION WINDOW.
6. Optionally, in the box adjacent to the list, rename the analysis.
a. At the bottom of the Volume Interference dialog box, select the Saved analysis type.
* 
The Saved type of analysis displays and dynamically updates while modeling
b. Optionally, in the box adjacent to Saved, rename the analysis.
7. Click OK to complete the analysis, Cancel to cancel the analysis, or Repeat to start a new analysis.