Electrical Design
>
Harness
>
Laying Out Cables
> To Insert a Bend to a Flattened Harness
To Insert a Bend to a Flattened Harness
1.
Click
CABLE MFG
>
Flatten
>
Bend
>
Insert
and select a point on the cable.
2.
Type the bend radius and bend angle at the prompt.
Bend angles are relative to the previous segment of cable, with positive angles going counterclockwise.
Related TopicsĀ
About Laying Out Cables
Tip: Using Bends
This site works best with JavaScript enabled