To Perform Standard Design Rule Operations
1. In an open board part, click > > . The Model Properties dialog box opens.
2. Under Board, click change in the Design Rules line. The Design Rules dialog box opens.
3. Perform one of the following operations:
◦ To copy a set of design rules to the part, browse to the set and click
, or right-click and choose
Copy.
◦ To delete a set of design rules from the part, click
, or right-click and choose
Delete. The set of design rules is deleted from the part but still exists in the directory.
◦ To assign a set of design rules, select a set of design rules from the library or model list, right-click and choose Assign. The set of design rules is assigned to the part.
◦ To unassign a set of design rules, select a set, and right-click and choose Unassign. The set of design rules is unassigned but is still saved with the part.
◦ To edit a set of design rules, select a set from the library or copied to the model, and right-click and choose Properties. The set of design rules opens. Edit the information and click > .
4. Click OK.