Electrical Design > Cabling > Using Overbraids > To Modify Overbraids
To Modify Overbraids
1. Ensure that you have created the overbraid feature with one or more cables and wires.
2. Click the arrow next to OverBraid.
* 
The OverBraid option is not available in the ribbon by default. You can add the OverBraid option to the ribbon from the PTC Creo Parametric Options dialog box.
3. Click Modify Overbraid.
4. Do one of the following:
Click on the status bar and select the overbraids by name from the Search Tool dialog box.
Select the overbraids from the Model Tree.
Cabling highlights all the routed cables of the selected overbraid and prompts you to select two locations.
5. Select two locations on the routed cables. Cabling overbraids the cables between the two locations that you selected.
6. Repeat step 4 to overbraid as many sections of cables as required.