Electrical Design > Cabling > Exporting Cabling Geometry > To Export Cabling Geometry
To Export Cabling Geometry
You can export the complete geometry of wires and cables, or just the centerlines, from a Cabling assembly to IGES and other common formats.
1. Click File > Save As > Save a Copy.
2. Select the export format in the Type box. The Export Environment dialog box for the selected environment opens. If the functionality is supported in the selected format:
Select Export cable surfaces to export the cables as surfaces (as seen in thick Cable mode.)
Select Datum curves and points to export cabling harness as centerlines.
Select neither to exclude any cabling geometry information from the export.
3. Click OK.