Data Exchange > AutobuildZ > Creating Parts and Mapping Views > To Manually Map Drawing Views to Datum Planes of a Part
To Manually Map Drawing Views to Datum Planes of a Part
When the views on a drawing do not automatically map to the datum planes of the 3D part or when Automatic view mapping is not selected in the Preferences dialog box, the View Mapping dialog box opens with the part name displayed as the Part model name.
1. Under Select combination, select a drawing view and a datum plane from the orthographic views listed in the 2D view box and the datum planes listed in the 3D plane box.
* 
The 2D view box does not list the sectional, detailed, and auxiliary views of the part because these views are secondary views that are defined only when an orthographic view exists.
Map is available only when you select a drawing view and a datum plane for mapping.
2. Click Map to first map the selected drawing view and the datum plane and subsequently map all drawing views and datum planes of the new part model based on the first mapping. The View-to-plane mapping table lists the mapping.
3. Click Reset if you want to clear the current mappings and remap the drawing views and the datum planes.
4. Click OK.