About Screw Fasteners
You can create complete screw fasteners together with the placement of the screws, nuts, inserts, washers, holes, and threads in the following ways:
Place a new screw fastener on a datum point or axis or on a cylindrical surface.
Place the pointer where you want to place a new screw fastener and click.
Reassemble an existing screw fastener.
Redefine screw fasteners.
Update screw hole positions that were created without external references.
Check existing screw fasteners.
Create screws, nuts, inserts, or washer instances, and save them in the Creo Intelligent Fastener library.
You can also create the holes and threads with or without external references and save your existing site-specific screws, nuts, inserts, and washers in the Creo Intelligent Fastener library.