Area
|
Icon
|
Command
|
Size and Standard
|
![]() |
Select a standard and size for the profile type.
|
Reference Method
|
![]() |
Assemble the profile on a straight curve.
|
![]() |
Assemble the profile between two points.
|
|
![]() |
Assemble the profile along a bend curve.
|
|
References
|
Click first reference collector and then select the first reference for profile assembly.
|
|
![]() |
Create a sketch with one straight line using the Creo Parametric sketcher tool.
|
|
Click the second reference collector and then select the second reference for profile assembly if required.
|
||
![]() |
Create a datum point feature using the Creo Parametric datum point tool.
|
|
Orientation plane
|
Click the reference collector and then select the orientation plane for profile, assembly if required.
|
|
![]() |
Create a datum plane feature using the Creo Parametric datum plane tool.
|
|
Move
|
![]() |
Align the surface, edge, or vertex with the reference curve
|
![]() |
Reset profile move.
|
|
![]() |
Top left
|
|
![]() |
Top center
|
|
![]() |
Top right
|
|
![]() |
Center left
|
|
![]() |
Center middle
|
|
![]() |
Center right
|
|
![]() |
Bottom left
|
|
![]() |
Bottom center
|
|
![]() |
Bottom right
|
|
![]() |
Move by specific values
|
|
Rotate
|
![]() |
Rotate by -90°
|
![]() |
Reset
|
|
![]() |
Rotate by 180°
|
|
![]() |
Rotate by 90°
|
|
![]() |
Rotate by a specific angle
|
|
![]() |
Toggle start and end points
|
|
Filename
|
Enter desired filename
|