지원되는 명령취소/명령복구 작업
드로잉 사용자 인터페이스에서 사용할 수 있는, 아래에 나열된 명령은 명령취소하고 명령복구할 수 있습니다.
편집 메뉴의 명령
• 잘라내기(Cut)
• 붙여넣기(Paste)
• 삭제(Delete)
• 삭제 명령취소(Undo Delete)
• 이전 표시된 시트 설정(Set Previously Displayed Sheet)
레이아웃 탭의 명령
• ![](../detail/images/drw_move_to_sheet_16x16.png)
(
시트로 이동(Move to Sheet))
주석 탭의 명령
• ![](../detail/images/drw_attachment_16x16.png)
(
첨부(Attachment))
| 위의 명령은 치수를 제외하고 지시선이 있는 제도판 항목의 지시선 이동/변경만 지원합니다. 참조 추가 및 삭제는 지원되지 않으며 스택이 지워집니다. |
• ![](../detail/images/dwg_dimension16x16.png)
(
치수(Dimension))
• ![](../detail/images/dwg_ord_dimension16x16.png)
(
누진 치수(Ordinate Dimension))
• ![](../detail/images/drw_auto_ord_dimension_16x16.png)
(
자동 누진 치수(Auto Ordinate Dimension))
• ![](../detail/images/dwg_ord_ref_dimension16x16.png)
(
누진 참조 치수(Ordinate Reference Dimension))
• ![](../detail/images/drw_auto_ord_ref_dimension_16x16.png)
(
자동 누진 참조 치수(Auto Ordinate Reference Dimension))
• ![](../detail/images/dwg_create_note16x16.png)
(
메모(Note))
• ![](../detail/images/drw_balloon_note16x16.png)
(
풍선 메모(Balloon Note))
스케치 탭의 명령
• ![](../detail/images/dwg_trim_intersect16x16.png)
(
교차지점에서 분할(Divide at Intersection))
• ![](../detail/images/dwg_trim_divide16x16.png)
(
균등 세그먼트 분할(Divide by Equal Segments))
• ![](../detail/images/dwg_trim_corner16x16.png)
(
코너(Corner))
• ![](../detail/images/dwg_trim_bound16x16.png)
(
경계(Bound))
• ![](../detail/images/dwg_trim_length16x16.png)
(
길이(Length))
• ![](../detail/images/dwg_trim_increment16x16.png)
(
증분(Increment))
• ![](../detail/images/sketcher_fillet16x16.png)
(
2 탄젠트 필렛(2 Tangent Fillet))
• ![](../detail/images/sketcher_arc_3tangent16x16.png)
(
3 탄젠트 필렛(3 Tangent Fillet))
• ![](../detail/images/sketcher_chamfer16x16.png)
(
모따기(Chamfer))
주석 명령
• 동적 이동
◦ 지시선 이동
◦ 텍스트 이동
• 일반 단축 명령
◦ 지시선 유형 전환(Toggle Leader Type)
◦ 지시선 추가(Add Leader)
◦ 메모 유형 변경(Change Note Type)
• 핫 영역 단축 명령
◦ 참조 변경(Change Reference)
◦ 조그 삽입(Insert Jog)
◦ 조그 제거(Remove Jog)
◦ 삭제(Delete)
◦ 화살표 유형(Arrow Style)