Removing Material
Remove material by using the
Remove Material option on the
Extrude tab.
1. To specify the sketch plane, in the Model Tree, select the datum plane TOP.
2. On the
Model tab, click
Extrude from the
Shapes group. The
Extrude and
Sketch tabs open.
3. To display sketch dimensions, on the in-graphics toolbar of the
Sketch tab, click
Sketcher Display Filters, and select the
Dimensions Display check box.
4. To orient the sketch plane parallel to the screen, click
Sketch View on the in-graphics toolbar.
5. To sketch a circle:
a. On the
Sketch tab, click
Center and Point in the
Sketching group.
b. To specify the center of the circle, click the pointer over the intersection of the dashed lines.
c. To specify the diameter of the circle, drag the pointer away from the center and click. It does not matter how far you drag the pointer.
d. To exit the sketch
Center and Point tool, middle-click two times. The diameter dimension appears.
6. To edit the circle diameter, double-click the diameter dimension, edit the value to 75.5, and press ENTER.
7. To complete the sketch, on the
Sketch tab, click
OK. The
Sketch tab closes.
8. On the
Extrude tab, make sure that
Remove Material is selected.
9. Double-click the depth dimension, edit the value to 51.5, and press ENTER.
10. On the
Extrude tab, click
.
11. Rotate the model to see the removed material.
