Multiphase Flow for a Fuel Tank: Exercise 2—Creating Boundary Conditions
1. Under
Domains, right-click
NOZZLE and select
Add Boundary Condition. The
Surface Sets dialog box opens.
2. Select Nozzle_Air_Outlet as shown in the figure below.
1. Nozzle Air Outlet
2. Tank Air Outlet
3. Nozzle Fuel Inlet
3. Click OK. Under General Boundaries a new entity BC_1 is created.
4. Under
Domains, right-click
NOZZLE and select
Add Boundary Condition. The
Surface Sets dialog box opens.
5. Select Nozzle_Fuel_Inlet as shown in the figure.
6. Click OK. Under General Boundaries a new entity BC_2 is created.
7. Under
Domains, right-click
TANK and select
Add Boundary Condition. The
Surface Sets dialog box opens.
8. Select Tank_Air_Outlet as shown in the figure.
9. Click OK. Under General Boundaries a new entity BC_3 is created.
10. Right-click and rename the following boundary conditions:
◦ BC_1 as Nozzle_Fuel_Inlet
◦ BC_2 as Nozzle_Air_Outlet
◦ BC_3 as Tank_Air_Outlet
