Creo Tutorials > Creo Flow Analysis Tutorials > Additional Tutorials > Creo Flow Analysis Additional Tutorials > Tutorial 2 - Turbulent Flow in Diffuser > Turbulent Flow in Diffuser: Exercise 5—Creating a Monitoring Point
  
Turbulent Flow in Diffuser: Exercise 5—Creating a Monitoring Point
1. In the Post-processing group, click Monitor Points. Under Results > Monitoring Points, Point 01 is added.
2. Create ten monitoring points.
3. In Results, under Monitoring Points select a monitoring point.
4. In the Properties panel, Model tab, set values for the Position as listed below:
Points
Positions
Point 01
3.50000, 0.050400, 0.00000
Point 02
3.574999, 0.055900, 0.00000
Point 03
3.65, 0.0609, 0.00000
Point 04
3.724998, 0.0664, 0.00000
Point 05
3.799999, 0.071400, 0.00000
Point 06
3.875, 0.0764, 0.00000
Point 07
3.949999, 0.081900, 0.00000
Point 08
4.025, 0.0864, 0.00000
Point 09
4.1, 0.091900, 0.00000
Point 10
4.217999, 0.099900, 0.00000
5. In the Functions panel click Turn on/off view properties and select Hide all surfaces from the list.