Modifying Profile Section Size
1. Click
Framework and then in
Profiles group click
Modify Size. The
Modify Size dialog box opens.
2. Referring to callout 1, select the profile to modify.
3. Select the Update profile move after change check box.
4. Click
to select a different profile section size. The
Element Definition dialog box opens.
5. Under Type select DIN 1017 and under Size select 80x60.
6. Click OK. The modified profile appears as a preview. Since the Update profile move after change is selected, the profile movement is updated so the profile still is aligned to the reference curve with is upper surface. Also, all patterned instances are modified. Your model should look like the model shown below: