Cyclone Separator with Particle Separation: Exercise 5—Creating Monitoring Points
1. Create two monitoring points.
2. In Results, under Monitoring Points right-click Point 01.
3. Select Rename and in the New Name box type Center_Point.
4. In the Properties panel, Model tab, set Position to 0, -0.45, 0.
5. In Results, under Monitoring Points right-click Point 02.
6. Select Rename and in the New Name box type Bin_Point.
7. In the Properties panel, Model tab, set Position to 0, -1.65, 0.
8. In the Functions panel click
Turn on/off view properties and select
Hidden Line from the list. The monitoring point appears as shown in the image.
