To Specify and Display the Increment Values for the Dragger Movement
1. Open a new or an existing part and click
Model >
Freestyle. The
Freestyle tab opens.
2. Click
Operations >
Options. The
Freestyle Options dialog box opens.
3. In the
3D Dragger Increments area, type values in the
Linear,
Angular, and
Scale boxes to change the default incremental snap values.
4. Click OK.
5. Click an open or a closed primitive from the gallery to display it in the graphics window.
6. Click the control mesh to display the dragger.
7. Click
Freestyle >
Increment to display the incremental snap values as you move the dragger.
| The values for the default_dec_places and default_ang_dec_places configuration options determine the number of decimal places for the incremental snap values in the Freestyle Options dialog box. |