Pressure Loads—Creo Simulation Live
You can create pressure loads on 3D model surfaces. A positive pressure load always acts opposite to the normal direction of the surface at every location, even if the surface is curved.
To Define a Pressure Load
1. Click
Live Simulation >
Pressure. The
Pressure Load dialog box opens.
2. Specify a name for the load, or use the default name.
3. Select the surfaces to which you want to apply a pressure load. Your selection appears in the References collector.
4. Enter a real number, arithmetic expression, or parameter name for the pressure load in the Pressure field.
5. Select units of pressure from the list or accept the default units.
6. Click OK to create and save the pressure load.