Creo Flow Analysis > Preprocessing > Defining Physics > Turbulence > Output Variables
  
Output Variables
This section describes the outputs you can obtain from the Turbulence module. The following types of data are available for output from the Turbulence module:
• Primary Variables
• Properties
• Derived Variables
• Boundary Variables
• Integrated Quantities
Output of Primary Variables
Primary variables are the fundamental variables for a given set of modules and models. They are required as part of the solution.
Primary Variables for Turbulence Module
Label in GUI
Label in GUI X-Y Plot Menu
Label in points.txt
Label in integral.txt
Definition
Units
Display or Output Options
Turbulent Kinetic Energy
tke_
NA
J
At a Point and in the GUI Display Window
Turbulent Energy Dissipation Rate
ted_
NA
J/s
At a Point and in the GUI Display Window
Output of Property Variables
Physical Properties for Turbulence Module
Label in GUI Variables
Label in GUI X-Y Plot Menu
Label in points.txt
Label in integral.txt
Definition
Units
Display or Output Options
Turbulent Viscosity
muT_
NA
Effective viscosity
Pa-s
At a Point and in the GUI Display Window
Output of Derived Variables
Derived variables are engineering data computed from the primary variables. While not required as part of the solution, they can provide valuable information for analysis of the results. Nothing is currently available for the Turbulence module:
Derived Variables for Turbulence Module
Label in GUI Variables List
Label in GUI X-Y Plot Menu
Label in points.txt
Label in integral.txt
Units
Display or Output Options
NA
NA
NA
NA
-
At a Point and in the GUI Display Window
Output of Boundary Variables
Boundary variables are data associated with a boundary. While not required as part of the solution, they can provide valuable information for analysis of the results.
Nothing is currently available for the Turbulence module:
Boundary Variables for Turbulence Module
Label in GUI Results Panel Variables List
Label in GUI X-Y Plot Menu
Label in points.txt
Label in integral.txt
Definition
Units
Display or Output Options
Y Plus
NA
NA
NA
Dimensionless wall distance
NA
NA
Output of Integrated Quantities
Integrated output are quantities that you can integrate over a boundary, interface, or volume.
Integrated Values for Turbulence Module
Label in GUI Properties
Label in GUI Plot Menu
Label in integral.txt
Definition
Units
Display or Output Options
Y Plus
Y Plus
yplus
Y Plus for turbulence model
m/m
Solid Boundaries and Interfaces
Turbulence Viscosity
MuT
Average turbulent viscosity
Pa-s
Volumes
Turbulent Kinetic Energy
tke
Average turbulent kinetics energy
J/kg
Volumes
Turbulent Energy Dissipation Rate
ted
Average turbulent dissipation
J/kg-s
Volumes
tke_mass_total
tke_m_tot
Total turbulent kinetics energy in a volume
J
Volumes