To Route a Typical Pipeline
1. Use one of the following options to enter the routing environment:
◦ Click
Create Pipe to create a new pipe line. Create a new line stock or select an existing one.
◦ Click
Route Pipe and select a pipe line in the Model Tree.
2. Click
Set Start to set a start point.
3. Click
Extend to extend pipe segments. You may create individual unconnected segments. Select a new start point where necessary.
When routing segments continuously, the endpoint that was just created automatically becomes the start point for the next routing operation.
4. Click
Environment to change the routing environment options.
5. Click
Connect to connect individual segments of the same pipeline.
6. Create other pipelines to add branches to the main pipeline; then create branches.