To Access the Clocking Angle as General Information
1. Click
Piping Info. The
Report Pipeline dialog box opens.
2. Under
Info Type, click
Clocking Angle and under
Definition, click
and select a pipe segment in the
Creo Parametric window.
3. Select a pipe segment with flexible portions.
You cannot select a pipe segment with a bend or miter cut.
4. Select or create a coordinate system at the highlighted end of the segment.
◦ The coordinate system origin must be coincident with the highlighted end of the selected pipe segment.
◦ The z-axis of the coordinate system must be aligned pointing inward along the pipe segment from that end.
◦ The coordinate system should belong to the active assembly.
5. Select the final coordinate system at the highlighted end of the selected segment, using the same constraints as before.
The system displays an INFORMATION WINDOW and writes the information to a file.