To Create a Reference Part Coordinate System on the Fly
Use the Reference Model Orientation dialog box to create a coordinate system that defines the reference model orientation.
1. On the
Mold or
Cast tab, click
Reference Model >
Locate Reference Model. The
Layout dialog box and the
Open dialog box open.
2. In the Open dialog box , select a .prt file reference model and click Open. The Create Reference Model dialog box opens.
3. In the Create Reference Model dialog box, select a Reference model type and the reference part file name, and click OK.
4. In the
Layout dialog box, under
Ref.Model Origin and Orient, click
.
5. Click GET CSYS TYPE > Dynamic. The Reference Model Orientation dialog box opens.
6. Change settings as needed and click OK.