To Create a Mold Assembly with Multiple Design Models
1. Create or retrieve a mold model.
2. Click
Mold >
Assemble Reference Model. The
Open dialog box opens.
3. Select the name of the design model in the browser window.
4. Assemble the new design model by using the options on the Component Placement tab.
5. At the prompt, enter the name of the new reference model. Each additional design model creates a new reference model in the mold assembly.
6. Repeat Steps 2 through 5 to assemble additional design models, or use the Pattern command.
7. Regenerate the assembly and the workpiece to update the mold cavity.