Mold Design and Casting > Using the Ejector Pin Catalog > Component Set Menu
  
Component Set Menu
Access the COMPONENT SET menu as follows:
Click Mold > Catalog > Ejector Pin.
Click Cast > Component > Catalog > Ejector Pin.
Click Mold Layout > Mold > Catalog > Ejector Pin.
The COMPONENT SET menu consists of the following items:
Add Set—Allows the selection, placement, and naming of a set of standard components, such as ejector pins, with the Define Set dialog box and the Define Parameters dialog box.
Redefine Set—Redefines a set of standard components, such as ejector pins, with the Define Set dialog box and the Define Parameters dialog box.
Delete Set—Deletes a set of standard components, such as ejector pins.
Trim to Geom—Trims a set of standard components, such as ejector pins, with the Trim to Geom functionality.
Clearance Cut—Creates a clearance cut on some or all of the component set members using the Clearance Cut dialog box. The Define Parameters dialog box can be used to select clearance values.