Command
|
Description
|
SET/ UPPER, a, LOWER, b
|
Indicates the Z values of the upper and lower contours. "a" and "b" are real numbers.
|
CLDIST / c
|
Indicates the distance that the top head is above the upper contour
n
|
LOAD / WIRE, n
|
Indicates that wire "n" should be threaded. "n" is an integer.
|
GENRTR / n
|
Indicates the power setting for subsequent motions.
|
SYNCTR / NEXT, n
|
Indicates a position where the two heads should be located simultaneously. There will be matching statements in the output of each head.
|
SYNCTR / LOWER|UPPER
|
Indicates that subsequent motions will be for lower or upper contour respectively.
|
UNLOAD / WIRE
|
Indicates that the wire should be cut.
|
OPSTOP
|
May be added automatically to indicate an optional stop.
|