To Mirror Multiple NC Sequences
1. Ensure that the active operation references a Mill or Mill/Turn workcell.
2. Select the required operation on the Model Tree and click Mill > Edit > Mirror Step.
The NC Sequences Mirroring dialog box opens displaying the sequences for the selected operation.
3. Select the check box adjacent to the NC sequences that you want to mirror, or click
to select all the displayed NC sequences.
To clear the selection of NC sequences, click
.
4. Click Select and select the datum plane that you want to use as the mirror plane.
5. Select one of the following Cutting Conditions:
◦ Click Keep if you want to keep the cutting conditions of the mirror NC sequence the same as that of the parent NC sequence. For example, if the parent NC sequence uses CLIMB as the cutting condition and if you choose to keep the cutting condition, then the resulting mirror NC sequence is also created with the cutting condition as CLIMB.
◦ Click Mirror if you want to mirror the cutting conditions of the parent NC sequence to the mirror NC sequence. For example, if the parent NC sequence has the cutting condition as CLIMB and if you choose to mirror the cutting condition, then the resulting mirror NC sequence is created with the cutting condition as UPCUT.
6. Click OK. Creo NC creates the mirror NC sequence for all the selected NC sequences.