To Set a Feature-specific Bend Allowance
1. On the feature tab, click Bend Allowance. The Bend Allowance tab opens.
2. Select an option from the Developed length calculation list:
◦ Use part settings—Uses the part's bend allowance settings to calculate the developed length for the feature.
◦ Use feature settings—Uses the feature bend allowance settings to calculate the developed length for the feature. Specify a factor and value.
3. To calculate developed length according to a different factor, select a new one. If required, specify a different factor value.
4. To use a bend table to calculate developed length for arcs, click Use bend table and select a table from the list.
|
Only bend tables copied to the part are available.
|